This page brings together the boundary map, contact details and official source links for planning applications handled by Melton in England (ONS code E60000089).
What to do next
Three steps before you submit
Start with Melton's current requirements, then prepare the right map and decide whether you need professional help.- 01
Check the official requirements
Read the official national source used on this page, then confirm Melton's current local requirements.
Open official guidance ↗ - 02
Create the right planning map
Once you know what is required, create a location or block plan for the site at UKPlanningMaps.com.
- 03
Decide whether you need professional help
If the boundary, access, proposal or drawing pack is complicated, compare businesses that publish coverage for Melton.
View professional help ↓
Official guidance check
Official planning-map guidance for Melton
The information below summarises “What to submit - How to apply - Planning Portal” from Planning Portal. It is national guidance relevant to applications handled by Melton, not guidance published by Melton. We checked it on 17 August 2026.
Location plan and site location plan
- The linked Planning Portal guidance says that a location plan or site location plan is required with the application drawings.
Site plan and block plan
- The linked Planning Portal guidance describes a site plan or block plan as the more detailed view of the property and proposal.
- The plan should show the proposed work, access.
This is our summary, not a substitute for the authority’s current validation list. Follow the source link before submitting because requirements and documents can change.
Architect
Listed as covering Melton
Architect
Listed as covering Melton
Shown from our directory according to published coverage. The directory is independent of the businesses listed; these are listings, not recommendations or endorsements.
Find a local professional in our directory.Planning-map essentials
Which map should you prepare for Melton?
Many applications use two complementary drawings: a location plan to identify the land and a block or site plan to show the site and proposal in more detail. The application type and local validation list determine what else is needed.
Wider site contextLocation plan
Shows the application site in its surroundings, commonly at 1:1,250 or 1:2,500. The red line must identify all land forming the application site, including relevant access.
Read the location-plan guide →Detailed site viewBlock or site plan
Shows the site, buildings, boundaries, access and proposed work in more detail, commonly at 1:200 or 1:500.
Read the block-plan guide →Scale and outputChoose and print the scale
Choose a scale that clearly shows the necessary context, then print the original PDF at its stated paper size using Actual size or 100%.
Compare planning-map scales →Print a map to scale → - Current, correctly licensed map base
- Recognised metric scale
- North point and scale bar
- Red application boundary
- Blue ownership boundary where relevant
- Enough context to identify the site
These guides explain the general principles. Before submitting, use Melton's official website to find its current validation list and application-specific requirements.
Questions about maps for Melton
What location plan should I submit to Melton?
Use a current, licensed map at a recognised metric scale with the application site clearly outlined in red, other nearby applicant-owned land in blue where relevant, a north point and enough road and building context to identify the site. Check Melton's current validation requirements for the final specification.
Is a site location plan the same as a location plan for Melton?
Yes. The two terms normally describe the wider map used to identify the application site, commonly at 1:1,250 or 1:2,500.
What is the difference between a site plan and a block plan?
The terms are often used for the same closer, detailed plan. It commonly uses 1:200 or 1:500 and shows the site layout, buildings, boundaries, access and proposed work.
Can I use an OS plan for a Melton application?
Ordnance Survey mapping is commonly used as a detailed base for planning maps, but the finished document still needs the correct scale, boundary, context, paper size and planning-use licence.
What if my planning map does not print to scale?
Match the PDF sheet size to the printer paper, select Actual size or 100%, turn off Fit or Scale to fit, then measure the printed scale bar. Do not stretch the PDF.
